This is a list of recipes for making
Treated Boards in a
Wood Treatment Tank. Since the rate of change for each attribute (or K Values) for each wood treatment tank is different, these recipes may not work exactly as written in your wood treatment tank. If a recipe does not work, it should at least give you a good starting point for figuring out a recipe that does work for your tank. There is also a
guide to wood treatment and on how to calculate your K Values as well as links to simulators.
*IMPORTANT* All quantities below are listed in 'seconds of treatment', not in debens of usage. Every 10 seconds of treatment will actually use 1 deben of resource. You must apply these recipes in the order listed. Board types have their attributes sorted alphabetically, and then are added to the list alphabetically.
Also, check the recipes below using the simulator to check if it will work in your Wood Treatment Tank. Each Tank has different K Values.
Nontoxic
- 20 Saltpeter - this boards need for Silkworm Farm (Joe-74)
Black Glossy Hard
- 130 Water, 20 Beeswax, 30 Oil, 30 Petrol, 10 Lead, 12 Oil
Rigid, Black
- 20 Ash, 10 Oil, 20 Petroleum, 10 Water in Jugs, 40 Sulphur, 20 Petroleum, 40 Lime, 10 Petroleum
Rigid, Termite-Resistant, Black
- 20 Ash, 10 Oil, 20 Petroleum, 10 Water in Jugs, 40 Sulphur, 30 Petroleum, 40 Lime, 10 petroleum
Rigid Hard
- 140 sulfur, 20 lime, 15 water in jugs
Above recipe, what's the water in jugs for? It'll cancel out any boards with Rigid and Hard!
Rigid Hard Volatile
- 60 petroleum, 60 sulfur, 15 lime
- 40 petroleum, 70 sulfur, 15 lime
Rigid Hard Blonde
- 5 Oil, 10 Lime, 70 Sulfur, 15 Lime
Rigid Rotproof
- 55 Sulfur, 25 Lime, 10 Oil, 20 Wax
- 40 Sulfur, 40 Lime, 60 Beeswax
- 130 lime, 60 beeswax --This just gave me Rotproof, not Rigid :( Sitamun
Rigid Rotproof Nontoxic
- 50 Sulfur, 40 Lime, 30 Water, 20 Oil, 20 Beeswax
Rigid fireproof
- 140 lime
- it would make sense to use water first....
Rigid Rotproof Nontoxic White
- 60 sulfur, 60 lime, 30 Petroleum, 30 Water
Pliable
- 190 beeswax, 50 ash
- not beeswax, then oil, then ash?
Pliable Rotproof
- 80 Oil, 50 Beeswax, 30 Saltpeter
- 80 Oil, 60 Beeswax, 40 Saltpeter (above didn't work for me, this one did)
- 90 Oil, 30 Beeswax, 30 Saltpeter -Please Verify- --This one works for me (Sapphicat), works for me too (Saratoya)
Pliable soft
- 120 Saltpeter
- might also try: Beeswax, then alternating water and beeswax, then saltpeter...
Pliable White
Pliable Soft Rotproof
- 90 Oil, 20 Beeswax, 10 Water in Jugs, 65 Saltpeter, 20 Beeswax, 7 Saltpeter, 3 Beeswax
- 90 Oil, 20 Beeswax, 10 Water in Jugs, 60 Saltpeter, 10 Petroleum
Pliable Hard
- 50 Oil, 6 Saltpeter, 10 Lime, 60 Sulfur, 10 Saltpeter
- 50 oil, 100 sulfur, 30 oil, 40 sulfur, 40 oil
Pliable Hard Volatile Blonde
- 50 oil, 30 ash, 90 sulfur, 20 ash, 60 sulfur
Pliable Termite-resistant
- 60 ash, 60 saltpepper, 20 Petroleum, 20 oil, 20 ash, 5 Petroleum
Pliable Termite-resistant Nontoxic Blonde
- 120 saltpeter, 20 lead
- 120 Salpeter, 10 Petroleum
Hard Rotproof
- 130 Sulfur, 7 Lime, 7 Oil, 15 Beeswax
- 5 Oil, 10 Lime, 65 Sulfur, 10 Lime, 10 Oil, 20 Beeswax
- 100 oil, 30 Petrol, 30 Sulphur, 15 Wax
Hard Rotproof Blonde
- 140 Sulfur, 120 Beeswax, 30 Sulfur
Hard fireproof
- 100 lime, 60 sulfur, 30 ash
- 100 lime, 60 sulfur, 10 lime -If it still isnt fireproof after the 10 lime add 5 more intill it is, should just require 5 more though
- 100 lime, 70 sulfur, 15 ash (if needed, add 5 more ash, it should be enough)
Soft Rotproof
- 100 Oil, 20 Beeswax, 10 Water, 60 Saltpeter, 20 Beeswax
Rotproof Nontoxic
- 60 lime 30 water 75 wax
- 35 water, 35 sulfer, 30 oil, 30 wax, 15 water
- for me 20 water at last (Joe-74)
Rotproof Termite Resistant
- 120 Oil, 40 Beeswax, 130 Saltpeter, 60 Lead, 82 beeswax. Edited By Shem (42bw to 82bw)
- I achieved Rotproof Termite Resistant with just 120 Oil, 40 Beeswax, 130 Saltpeter, 40 Lead
- 230 Beeswax 63 Sulfur 7 Saltpeter 8 Petroleum 14 water
Rotproof Termite-resistant Blonde
- 230 Beeswax 63 Sulfur 7 Saltpeter 8 Petroleum
- 230 Beeswax 63 Sulfur 7 Saltpeter 17 Lead 7 Beeswax
- 230 Beeswax 70 Sulfur 20 Saltpeter 10 Petroleum
- another option would be oil then beeswax, sulfur, saltpeter, Petroleum. The beeswax will recover some of the oil 'damage' to insect toxicity if you time it right. But are you really short of beeswax? :)
Glossy Blonde
- 121 water 186 beeswax 40 Sulfur
- 120 water, 30 saltpeter, 20 lime, 70 beeswax
Glossy White
- 121 water 186 beeswax 40 Sulfur 50 Lime 15 wax
- 120 water, 30 saltpeter, 20 lime, 20 beeswax, 20 lime, 70 beeswax
Hard White
- 150 sulfur, 10 saltpeter, 5 potash
Nontoxic White
Blond Termite-resistant