Macros
|
Main |
Tests |
Paint |
Macro |
Trade |
Fumeology |
Beer |
All macros that I post are tested in Windows XP Home sp2 at a resolution 1064, 768 with the game maximised.
Do not Leave Macros running unattended!
Currently all macros listed use ACTool
Although ACTool starts in Windows Vista it seems to stop working when it is not the active application.
This can be fixed by running it in administrator mode. -Zatarg
Charcoal Oven Macro
This is a modified version of
Anka's CCOven macro.
Special Thanks to
Anka for creating to original.
Note: the settings need adjusting for different number of ovens used. - overall delay and delay increment are the conmen culprits.
Changes Made
- ver 2.0
- changed flow to make it monitor all ovens individually.
- added timing control to allow for timing change of finished oven
- made the danger control changeable from the menu.
- but unsure if the value is used
- placed setting that work for me for 4 ovens in the default fields of the menu
- adjust for settings that work best for your ovens
- ver 2.1 fixed danger bar menu option
- the addition of a option to position the oven windows for you
- Ver 2.2
- added a warning message a start
- a wood overfill scan is now made to make tuning safer
- no longer adds wood when it is done
The File
CCOvenall
Bitty instructions are at the start of the macro
be sure to have 350 wood per oven and 20 water per oven (it will probably use less)
My Timings
These are the timings I use for that number of ovens. is a value is unlisted it is set to the macro default.
This data is a work in progress as I am trying to find the optimised settings.
- 1 Oven
- 2 Ovens
- Check bars = 1500
- Very stable
- Uses just under 600 wood
- 3 Ovens
- 4 Ovens
- 1200
- low oxy set to 100
- not yet optimum
- Uses about 1600 wood
- 5+ Ovens
- I do not have access to more then 4 ovens so can not fill this data in for you
Vegetable planter
This is a small tool that will plant some vegetables but will not tend them.
The File
Vegplanter
Pin plant window where you want and place mouse over the veg that you want to plant then press the 'start' hotkey
- remember to adjust seeds and dist for your specific veg in inv
- You need Global hotkeys enabled (under editor>>Prefences) and defined
Cement Stirring Aid
This will start the cement and stir it when both timers end.
The File
CementMix
- Fill the Vat with all mats need for cement
- Eat Food With 1hr duration and at least +21 to both End and Str
- Pin window in Top left of screen
- Start the tool
- Note : This was Designed for a guilded Clinker Vat
- Note2: a flaw has been spoted in the code will be fixed soon
Acro Clicker
Another simple tool, this time for test of the acrobat.
The File
AcroClicker
- You need Global hotkeys enabled (under editor>>Prefences) and defined
- Place mouse over the move you want to do and press the start hotkey.
- When you want to change the move just move the mouse to that move, no need to stop the macro
Global Notes
- AC tool does not run macros in vista to my knolage
- I you know of a way to get actool fully operating (ie Auto clicking) in vista please let me know or add it below ty
I can get ACTools to work in vista by running in administrator mode. -Zatarg